Safety data sheets › Cold galvanising aerosol
Dy-Mark MetalPro Zinc Gal Aerosol
Danger Dy-Mark (Aust) Pty Ltd
Open the safety data sheetPDF, 15 pages, 0.3 MB. Page 1 is 6D's cover; the manufacturer's sheet follows.
First aid
- Inhalation: If aerosols, fumes or combustion products are inhaled: Remove to fresh air.
- Skin: If solids or aerosol mists are deposited upon the skin: Flush skin and hair with running water (and soap if available).
- Eyes: If aerosols come in contact with the eyes: Immediately hold the eyelids apart and flush the eye continuously for at least 15 minutes with fresh running water.
Emergency 000 · Poisons Information Centre 13 11 26
- Product
- Dy-Mark MetalPro Zinc Gal Aerosol
- Manufacturer
- Dy-Mark (Aust) Pty Ltd
- Where 6D uses it
- Restoring galvanising on cut or welded steel, pit lids, frames and covers.
- Classification
- Aerosols Cat 1; Acute toxicity dermal Cat 4; Skin corrosion or irritation Cat 2; Serious eye damage or irritation Cat 2A; STOT single exposure Cat 3, narcotic effects; Chronic aquatic hazard Cat 1
- Dangerous goods
- UN 1950, Class 2.1 (UN 1950, aerosols), environmentally hazardous
- Sheet issued
- 10 March 2023, version 27.1
- Review due
- 10 March 2028
6D Civil Pty Ltd hazardous chemicals register 6DC-OHS-RG-0004 Rev A. This page summarises the manufacturer's safety data sheet, which governs. A printed copy is uncontrolled.